Skoda Octavia II 1.9 TDi BXE 2008 - Radiator fan fault - Fixed #
Posted by Ben-Zion Zarfati on November 13, 2010, 9:25 am
Year of Manufacture *: 2008 Engine Size and Code *: 1900cc TDi BXE ( Optional ) ECU Type: EDC16 BOSCH ( Optional ) Scanner Used: VAS 5052 ( Optional) Fault Codes: P0118
Hi,Members This 1 came in from another garage with this complain - "after body repair,(they replaced:RAD,CONDESOR,RAD FAN ASSEMBLY and MT). From this point the fan rad cann't operated - this assy' are full elec' - it's mean the all parts of the operating system inculded inside the main rad fan located in left side of this assy' - with the VAS 5052 I got DTC that say - the control of 1 activation fan is missed. I checked the lines to the rad fan and find that every things are O.K.,(include B+,Earth,15b+ and continunity on the line from the ECU who send the activate puls!!!)- the all assy' are OEM. I suspected that the ECU is fault - but I'd be happy to read some more info from yours expierence - Thanks,Benzi
Re: Skoda Octavia II 1.9 TDi BXE 2008 - Radiator fan fault #
First I'd like to thank to Matt Booth for his help - I'll try to explain my self better - and to give you all the fix... As I said - this car came from body shop and they replaced some parts from the front area like the Radiator,Condensor and the rad fan assembly. from some reason that I can't understand they changed the wires location in the T4p connector - (between the main harness to the rad fan assembly) - and the changed was between the B+ wire after switch ON and the signal wire from the ECU to the fan rad module part of the assembly...because of this I got the DTC fan rad 1 activation open circuit/short to GND. As I changed the wires location as it show in the elec' diagram(ge/li-gn) - the all things start to work and every body were satisfied.
Re: Skoda Octavia II 1.9 TDi BXE 2008 - Radiator fan fault #
on November 13, 2010, 3:24 pm, in reply to "