Petrol Diagnostics

Post a Response

Peugeot 406 Hpi 2003 - Starts then cuts out, codes P1113 & P1294 - Fixed #

Posted by John Forward on November 17, 2010, 4:52 pm

Year of Manufacture *: 2003
Engine Size and Code *: 2.0lt RLZ
( Optional ) ECU Type: Siemens
( Optional ) Scanner Used: Modis / Launch
( Optional) Fault Codes: P1113 or P1294

Hi All,
Any help with this one appreciated:
2003 Peugeot 406 Hpi arrived as a non-runner (starts then shuts down) with a fault code of P1113 Low Fuel Rail Pressure (launch). Checked fuel supply to high pressure pump at 5bar all OK.

Replaced fuel pressure regulator. (seen before in previous messages) No change.
Replaced Fuel pressure sensor on rail (after a 2month wait for part as no stock). No Change.

Replaced high pressure pump, no change.

Fuel rail pressure when cranking 4 - 5 bar. Running with pressure regulator disconnected 4 - 5 bar. (limp home mode revs to 2000 rpm only)

Tried Modis fault code changed to P1294 Fuel pressure regulator efficiency drop.
Losing my rag with this one not too mention running up a big bill of parts.

Many thanks in advance
John

Re: Peugeot 406 Hpi starts then cuts out

Posted by Colin Jelf <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1635' width='330' height='300' border=0 style='border:none;'> on November 17, 2010, 7:42 pm, in reply to "Peugeot 406 Hpi starts then cuts out"

Re: Peugeot 406 Hpi starts then cuts out

Posted by Kevin Gregory on November 17, 2010, 9:09 pm, in reply to "Peugeot 406 Hpi starts then cuts out"
Message modified by board administrator November 18, 2010, 8:40 am

Re: Peugeot 406 Hpi starts then cuts out

Posted by Mark Carter on November 17, 2010, 11:59 pm, in reply to "Re: Peugeot 406 Hpi starts then cuts out"
Message modified by board administrator November 18, 2010, 8:40 am

So for the third time.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Regards mark

Re: Peugeot 406 Hpi 2003 - Starts then cuts out, codes P1113 & P1294 #

Posted by Peter Warman <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=Peter+Warman' width='330' height='300' border=0 style='border:none;'> on December 1, 2010, 1:52 pm, in reply to "Peugeot 406 Hpi 2003 - Starts then cuts out, codes P1113 & P1294 #"
Peter Warman - Administrator

Hi All

We have bumped John's post back to the top as we are not sure why there are two blank posts, there may have been a technical issue (out of our control) with the Boardhost server when they were posted

Peter

Fixed #

Posted by John Forward on December 8, 2010, 12:28 pm, in reply to "Re: Peugeot 406 Hpi 2003 - Starts then cuts out, codes P1113 & P1294 #"
Message modified by board administrator December 8, 2010, 3:26 pm

Hi all,
I finally bit the bullet and took the car to the local Peugeot dealer. They cleared the fault codes (as i had with 3 different machines) and everything returned to normal.
Now a week or so later and still all OK. Unfortunately we will never no which component was responsible for the fault. All three have been listed on the forum as contenders.
John
P.S. I will be turning away the next one that arrives !

« Back to index

[ Petrol Diagnostics ]