Hi all,

Got this mini in with a no start condition. No fault codes evident in DME. Engine cranks but no start possible. We have no sparks at the plugs, although the coil grounds and 12v supplies are OK.

We've updated all the software, re-aligned the CAS-DME, swapped the main ECU relay for another, checked all the fuses in the engine bay fuse box and checked the crank position sensor output pulse, but still no start.

As it cranks the CAS must be exchanging codes with the DME and releasing the 'start enable' but for some reason we have no trigger to the coils via the DME. It looks like the power supply line to the DME (Pin 1, red & green wire) has no power to it, however, applying 12v to this line doesn't resolve the no-start condition.

Anybody got any suggestions?