Petrol Diagnostics

Back to Forum

Post a Response

Ford Fusion 1.4 2008 - Cutting out #

Posted by Paul Cunliffe on July 3, 2013, 9:28 am

Year of Manufacture *: 2008
Engine Size and Code *: 1.4 petrol
( Optional ) Scanner Used: kts and snap on

Hi

All hope you can help.customer complained of
car starting up and then cutting out. Got aa out
and he code read and said it was a throttle pedal
fault. I road tested car and it ran ok.
no fault codes out kts, snap on came up with
control module internal fault, air mass wrong.
The car does not have a air mass meter.been talking
too ford and the say it could be a throttle body
fault and a gold platted wiring harness. 400 quid.
don't want too fit throttle body with out signs of a fault. Terminals look ok,car has still not cut out
on me.

Has anybody had this fault

Thanks paul

Re: ford fusion 1.4 petrol

Posted by Chris Angus <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT5111' width='330' height='300' border=0 style='border:none;'> on July 3, 2013, 11:24 am, in reply to "ford fusion 1.4 petrol "

I've been battling with one similar for the last couple of weeks, intermittent egr and throttle body codes, i've put some contact grease on the plugs to see what happens. I've also read about the loom and terminal problem and cure is new throttle body and loom. That will be my recomendation if it comes back.

Chris

Re: ford fusion 1.4 petrol

Posted by Piotr Sokolowski <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1848' width='330' height='300' border=0 style='border:none;'> on July 3, 2013, 9:39 pm, in reply to "Re: ford fusion 1.4 petrol "

Chris which wiring loom we are talking about? I got fiesta 52 plate 1.4 customer fitted new throttle body. I performed latest calibration but still EAC info and engine is hunting and bringing P2119 throttle body problem

Link: http://www.pandpauto.co.uk

Re: ford fusion 1.4 petrol

Posted by Ian Slattery <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1196' width='330' height='300' border=0 style='border:none;'> on July 3, 2013, 10:31 pm, in reply to "Re: ford fusion 1.4 petrol "
Ian Slattery

Check your emails.

Its more for Piotr as i don't think it will cover 08 cars.

Try cleaning out the pcm connector as explain in the tsb. hth.

Regards Ian.

Re: ford fusion 1.4 petrol

Posted by Lee Mackintosh <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1348' width='330' height='300' border=0 style='border:none;'> on July 4, 2013, 10:51 am, in reply to "Re: ford fusion 1.4 petrol "
Lee Mackintosh

I jsut recently had a fusion in with a TP related fault. i found antifreeze contamination in the rear of the 16 pin multi-plug just positioned below the water housing on the side of the cylinder head.

This water housing was leaking and the coolant worked its way up into the plug. I believe this to be the reason for my fault code.

Cleaned out connection and replaced water housing and so far no phone calles reporting any other issues.

thanks
lee

Re: ford fusion 1.4 petrol

Posted by Chris Angus <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT5111' width='330' height='300' border=0 style='border:none;'> on July 4, 2013, 3:37 pm, in reply to "Re: ford fusion 1.4 petrol "

Hi Piotr, loom is for newer model, I would be looking for air leak on yours, sounds like the throttle is struggling to hold idle, check the crankcase breather pipes and valve.

Re: ford fusion 1.4 petrol

Posted by Piotr Sokolowski <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1848' width='330' height='300' border=0 style='border:none;'> on July 4, 2013, 8:46 pm, in reply to "Re: ford fusion 1.4 petrol "

thanks for your advices guys . I will have a look and letr you know.

Link: http://www.pandpauto.co.uk

Re: ford fusion 1.4 petrol

Posted by Peter Keverne <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT2835' width='330' height='300' border=0 style='border:none;'> on July 12, 2013, 5:36 am, in reply to "Re: ford fusion 1.4 petrol "
Peter Keverne

hi piotr

have you tried to reset adaptions think this can be done using ids.

peter

Re: ford fusion 1.4 petrol

Posted by Piotr Sokolowski <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1848' width='330' height='300' border=0 style='border:none;'> on August 4, 2013, 9:07 pm, in reply to "Re: ford fusion 1.4 petrol "

ok mine is fixed. As I said customer previosuly fittwe ECP throttle body . So I was assuming fault is in ecu or ecu software. Done both of and EAC light is gone but still hunting and cutting out. Check the wiring etc- all good. I said to the customer'I think it is trottle body but genuin eon eplease' He look for me ... Few days later phone call - car fixed new genuine throttle body fixed the problem. I love ECP - they bring me so much work . Heheheeh. thanks guys for your help.

Link: http://www.pandpauto.co.uk

« Back to index

[ Petrol Diagnostics ]

Copyright © uk autotalk