Petrol Diagnostics

Post a Response

Jaguar XKR 4.2 2008 - How does the intake temp sensor work? - Fixed #

Posted by Sean Hemming on December 17, 2013, 11:44 am

Year of Manufacture *: 2008
Engine Size and Code *: 4.2
( Optional ) ECU Type: Denso
( Optional ) Scanner Used: Bosch KTS
( Optional) Fault Codes: P00AB

Hi, does anyone know how the intake temp sensors work? Live data shows the nearside 1 at about 15 degrees & the offside goes up to 30+ which seems very high. The nearside sometimes drops out to -40 open circuit. I've volt dropped the wiring & all is good.
The wiring diagram I've got seems to be wrong. I've tried a new sensor & swapped them around which makes no difference.
Does anyone have a correct wiring diagram for this?
Many thanks

Re: Jaguar XKR

Posted by ian slattery <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1196' width='330' height='300' border=0 style='border:none;'> on December 17, 2013, 8:46 pm, in reply to "Jaguar XKR"
Ian Slattery

Hi Sean.

Check your emails.

Not sure that's the right diagram so check the vin, it seems to cover all engines in one.

Regards Ian.

Re: Jaguar XKR

Posted by Sean Hemming <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=ukat3654' width='330' height='300' border=0 style='border:none;'> on December 18, 2013, 4:02 pm, in reply to "Re: Jaguar XKR"
Sean Hemming

Hi Ian

Got the email, thanks for that it looks good.

Much appreciated.

Fixed #

Posted by Sean hemming on December 27, 2013, 8:25 am, in reply to "Re: Jaguar XKR"
Edited by board administrator January 4, 2014, 1:14 pm

Forgot to re post before. Found a broken wire, easy fix with the right diagram! Car fixed & gone.

Thanks

« Back to index

[ Petrol Diagnostics ]