Hi,

We have the following items that are surplus to requirements and are available "free" to whoever wants them. * All we ask is a suitable donation to a charity of our choice for whatever you think they are worth to you.

First up is an old Bear BACE engine analyser. We inherited this a long time ago and have never really used it. Its your typical old school big box analyser which will be fine on old style ignition systems but not very good on newer wasted spark or coil on plug systems. It also includes a exhaust gas analyser and printer but have never used the last two items so can't really say whether they work. The gas analyser will probably need calibrating. We've not powered this up for a long time, but see no reason why it shouldn't be ok.



Next up is a Bear MOT Gas Analyser (both petrol and diesel). We were using this regularly until mid last year when the spec for diesel smoke meters changed and that part of it was no longer approved for MOT testing.

As we haven't used it for such a while it will need calibrating before it can be used or alternatively seeing if its possible to disable the MOT annual calibration lockout. We can get probably get this calibrated for you at cost but virtually any company should be able to do this for you.

It includes a 486 DOS based PC and dot matrix printer.



Diesel smokemeter attachment for the above analyser.



If you're interested in either unit then let me know with an indication on where you are located and when you can collect (the sooner the better).

You will need a big van or trailer to transport these units.

We are located in Macclesfield, Cheshire.

Regards

Sean

P.S. They have been dusted down since these pics were taken ;-)