Hi all

Asked to look at this for another garage.
Vehicle towed in with running fault and clutch slip

Fault code present for camshaft position sensor.
Engine would start and run at about 400 rpm and would not rev
Engine vacuum low
Valve timing ok on belt and piston to valve relationship
No vacuum leaks or exhaust obsruction
Ignition timing retarded (too far to measure)
Using Glyn's waveform, pick up on flywheel 11 teeth out
Gearbox out and pick up ring loose on flywheel
New flywheel fitted and all now O.K.

Hope it might help someone in future

Many thanks

David