Fixed Archived Message
Posted by ray on August 29, 2004, 10:07 am, in reply to "Re: peugeot 106 kreg 1.4 kdx multiple codes"
thanks darren. I found the fault, I removed the bracket that holds the ecu on the o/s inner wing to check the main relay & injector resister thats underneath & where the loom splits to feed these, it has rubbed through on the engine mounting, its melted the insulation of 1 wire & melted 3 or 4 wires together & it looks as if it has traveled the lenth of the loom. So it looks like a new loom to be fitted. ray
|
|