Hi AllPeugeot 106 1.1 HFX M74.4 year 2000 (X)
This vehicle has had a non start fault for about 3 weeks, i have checked through the archives and tried many of the things suggested
No fault codes present
The vehicle will turn over and you can hear the fuel pump prime but does not fire.... no spark at plugs at all
Autodata does not give any pinout data for this ECU
The immobiliser aerial around the key has been replaced
The crank sensor has been replaced
The main relay under the ECU has been replaced (brown)
I have spoken to Mike at ATP who has suggested that this may be an immobiliser problem and the ECU is not waking up
Before i send this ECU off to Mike to have it checked, just thought i would run it by you lads first
Many thanks
Peter
PS: This vehicle did have a leaking screen which did allow water onto the wiring behind dash, but this has been dried out and the vehicle has started since, but non start on Saturday and the same now. There is a small black box behind the ignition key, is this something to do with the immobiliser?
The key does not have a plip (button)