Re: Vauxhall, calibra, 1996, V6 X25XE Injector/ecu Fault Archived Message
Posted by Mark Carter on January 21, 2008, 10:15 pm, in reply to "Re: Vauxhall, calibra, 1996, V6 X25XE Injector/ecu Fault"
Hi, ESI(bosch info system)says that the motronic 2.8 system fitted to the Vauxhall calibra is a sequential system and injector no4 is connected to pin no 34 on the ECU. It can only be a ECU fault or a wiring issue,it might pay to remove the wire from pin 34 ECU and run a loop wire to the injector,this will prove one or the other. Hope this helps. Regards Mark.
|
Message Thread:
- Vauxhall, calibra, 1996, V6 X25XE Injector/ecu Fault - Mike field January 21, 2008, 10:25 am
- Re: Vauxhall, calibra, 1996, V6 X25XE Injector/ecu Fault - lee mackintosh January 21, 2008, 8:16 pm
- Re: Vauxhall, calibra, 1996, V6 X25XE Injector/ecu Fault - Mark Carter January 21, 2008, 10:15 pm
|
|