Fiat Punto 2001 - Non starter after second hand ECU being fitted #
Posted by Mark Robins on June 7, 2010, 8:52 am
Year of Manufacture *: 2001 Engine Size and Code *: 188A4.000 ( Optional ) ECU Type: IAW 59F ( Optional ) Scanner Used: Autocom
Hi Guy,
Any info on this vehicle?
Had This non-runner dropped off it’s been fitted with a second-hand ECU, IGN barrel key etc, no feed to ign coils or injectors while cranking (although there’s a momentary pulse when first switching on) but nothing while cranking. Fault codes logged... P0500 Vehicle speed sensor U1600 Electronic key; present
Live data Request Controller. Not allowed Injection controller. Programmed Variant coding. Not achieved Main relay is not being driven/activated while cranking Crank and cam sensor OK, my question is, is this an ECU coding (are they coded?) Or immobiliser issue? I have limited functions on this model (no coding) any info greatly appreciated before I send it on it's way!
Re: Fiat / Punto Non starter.
Posted by Pete Mutlow on June 7, 2010, 11:51 am, in reply to "Fiat / Punto Non starter." Peter Mutlow
Hi Paul,
You might be right in your thoughts. I am assuming that the ECU etc was fitted after the non-start situation. However, do the fault codes clear and reappear after cranking?
on June 7, 2010, 11:51 am, in reply to "