Petrol Diagnostics

Post a Response

Peugeot 406 2.2 3FZ 2002 - Will not rev above 1500 rpm, P1112 & P1153 - Fixed #

Posted by Les Smith on June 28, 2010, 3:27 pm

Year of Manufacture *: 2002
Engine Size and Code *: 2.2 code 3fz ew12
( Optional ) Scanner Used: solus
( Optional) Fault Codes: P1112 p1153

vf38cfza81514486

Hi From another garage with same codes and same fault despite him fitting a new throttle motor position sensor. When working sensor the butterfly does not move. I cleared codes and started and was OK with butterfly moving. Ran down road. All OK. Switch off and back to square one. When switching off the butterfly opens and closes rapidly for about 2 seconds. With fault there the inj pulse is stuck at 13Ms and both lambda sensors at .80 and holding. The P1153 code is throttle end stop programming. Does this need reprog when new? which if the case, I do not have equipment for this.
Any pointers I would appreciate

regards
Les

Re: peugeot 406 will not rev above 1500 vf38cfza81514486

Posted by steve fisher <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1920' width='330' height='300' border=0 style='border:none;'> on June 28, 2010, 11:16 pm, in reply to "peugeot 406 will not rev above 1500 vf38cfza81514486"
Steve Fisher

Les

The P1112 code is brought by the P1153

P1112 doesnt flag the mil but P1153 does

IMHO once P1153 shows up then the throttle body is beyond saving and it does require a re-learn procedure from a capable diag tool , if you have someone near you with the equipment to perform a re-learn then its worth trying the old one first but i wouldnt hold much hope

Hth's

Steve

Fixed #

Posted by Les Smith on July 1, 2010, 7:05 pm, in reply to "Re: peugeot 406 will not rev above 1500 vf38cfza81514486"
Message modified by board administrator July 8, 2010, 11:00 am

Cheers Steve, saved me time. went to dealers and programmed.
les

Re: peugeot 406 will not rev above 1500 vf38cfza81514486

Posted by steve fisher <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1920' width='330' height='300' border=0 style='border:none;'> on July 1, 2010, 7:20 pm, in reply to "Re: peugeot 406 will not rev above 1500 vf38cfza81514486"
Steve Fisher

No problem Les glad to help

Did

Steve the dealer re-learn the old one or fit a new one

Re: peugeot 406 will not rev above 1500 vf38cfza81514486

Posted by les smith <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1209' width='330' height='300' border=0 style='border:none;'> on July 2, 2010, 7:24 pm, in reply to "Re: peugeot 406 will not rev above 1500 vf38cfza81514486"
Leslie Smith

New one
Les

« Back to index

[ Petrol Diagnostics ]