Petrol Diagnostics

Post a Response

BMW 328i 2.8 1999 - Which lambda sensor goes to which connector? #

Posted by Paul Howd on March 21, 2012, 6:24 pm

Year of Manufacture *: V reg
Engine Size and Code *: 2.8

Possibly dumb question...

This is the one with two Lambda sensors, one on the manifold for the front 3 cyls, the other on the manifold for the rear 3.. with the two connectors running along the injector rail

I am guessing that the "Front" lambda should be connected to the "Front" connector and the "Rear" one to the "Rear" connector.

Is this correct?

Re: BMW 328i-Which lambda sensor goes to which connector??

Posted by aidan birley <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT2879' width='330' height='300' border=0 style='border:none;'> on March 21, 2012, 6:52 pm, in reply to "BMW 328i-Which lambda sensor goes to which connector??"
Aidan Birley

hi
My understanding is that as a general rule Bank 1 should include Cylinder 1

You should be able to find out which connector the ECU considers as bank 1 by inducing a fault code.

Cheers Aidan

« Back to index

[ Petrol Diagnostics ]