Re: Audi A4 2.0 ALT None start Archived Message
Posted by Michael Whitworth on September 23, 2007, 10:22 am, in reply to "Re: Audi A4 2.0 ALT None start"
Although I didn't strip the engine down myself, I believe the engine was turned by hand as I trust the garage who did the job. And would expect them to do so having disturbed the cam timing. CPS bolt was not too long. Vag com report Friday,14,September,2007,14:19:40:06956 VAG-COM Version: Release 704.1 Address 01: Engine Control Module Part Number: Component and/or Version: Software Coding: Work Shop Code: 2 Faults Found: 16705 - Engine Speed Sensor (G28): Implausible Signal P0321 - 008 - Implausible Signal 16706 - Engine Speed Sensor (G28): No Signal P0322 - 004 - No Signal/Communication - Intermittent Mike
|
Message Thread: | This response ↓
- Audi A4 2.0 ALT None start - Michael Whitworth September 19, 2007, 8:14 am
- Re: Audi A4 2.0 ALT None start - Glyn Morgan September 19, 2007, 1:27 pm
- Re: Audi A4 2.0 ALT None start - Nick Bell September 19, 2007, 5:03 pm
- Re: Audi A4 2.0 ALT None start - john weddup September 19, 2007, 6:35 pm
- Re: Audi A4 2.0 ALT None start - Kevin Francks September 19, 2007, 9:55 pm
- Re: Audi A4 2.0 ALT None start - Colin bell September 20, 2007, 7:28 am
- Re: Audi A4 2.0 ALT None start - Tony Ludford September 20, 2007, 8:13 am
- Re: Audi A4 2.0 ALT None start - Nick Bell September 20, 2007, 8:46 am
- Re: Audi A4 2.0 ALT None start - lee mackintosh September 20, 2007, 9:12 am
- Re: Audi A4 2.0 ALT None start - Terry Wood September 20, 2007, 9:31 am
- Re: Audi A4 2.0 ALT None start - Tony Ludford September 20, 2007, 11:17 am
- Audi A4 2.0 ALT None start - Terry Wood September 20, 2007, 2:05 pm
- Mike's Piston Pics - Peter Warman September 26, 2007, 8:50 pm
|
|