non start, Codes as given. If codes are cleared then sometimes it will start and run for a second or two before stopping. Codes have then returned.


Am expecting that it is an ECU issue, I had one like this a few years back, and the voltage trace I am getting is similar to the [BAD] one listed in the Picoscope waveform database.

however there is one thing puzzling me.

I am actually getting sparks at the plugs. The reason why the engine isnt running is because the injectors are not being switched. I cannot remember if this happened last time. Is this a "Safe mode" thing, If the ECU doesnt like the coil signal it shuts down the injectors?