Re: Seat Altea 1.6 BSE 2008 - Non start with no comms #
Edited by ukat3416 on March 1, 2013, 4:49 pm
|
Just to start somewhere i thought i would check canbus high and low at the 16 pin with the scope, not happy with what i am seeing, half a volt on either side of can low and high. I really need a full wiring schematic for this car if anyone outthere as one.I did find the gateway behind the glove box but not sure how to check, i did disconnect gateway and watched scope on high and low and noticed it dropped to 0 volts on both sides, then back to half volt when reconnected, but short of the 2.5volts i am expecting !
|
|
Message Thread | This response ↓
 Seat Altea 1.6 BSE 2008 - Non start with no comms - Fixed # - Lee Hemmings February 26, 2013, 8:59 am
- Re: Seat altea -No Start with no comms - james mccallum February 26, 2013, 9:41 am
- Re: Seat altea -No Start with no comms - james mccallum February 26, 2013, 9:44 am
- Re: Seat altea -No Start with no comms - Lee Hemmings February 27, 2013, 8:55 am
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - James McCallum February 27, 2013, 7:15 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - jm February 27, 2013, 7:29 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - John Ritchie February 27, 2013, 7:52 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - lee hemmings March 1, 2013, 4:21 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - lee hemmings March 4, 2013, 11:10 am
- Fixed # - Lee Hemings March 11, 2013, 3:56 pm
« Back to index | View thread » |
on March 1, 2013, 4:21 pm, in reply to "Seat Altea 1.6 BSE 2008 - Non start with no comms #"