Re: Seat Altea 1.6 BSE 2008 - Non start with no comms #
Lee Hemmings
|
So far,pin 6 an 14 diagnosctic socket 66 ohms (too high)disconnect cluster an steering ecu nothing changes, i have 60 ohms on steering canbus.
At gateway pin 10, 12.5+
pin 5, 14v
pin 20, .5v
pins 8,6,grounds, pin 1 .5v ground
Not sure how to test pin 16 which jim mention for switching ?
Any more input gents is appreaciated
|
|
Message Thread | This response ↓
 Seat Altea 1.6 BSE 2008 - Non start with no comms - Fixed # - Lee Hemmings February 26, 2013, 8:59 am
- Re: Seat altea -No Start with no comms - james mccallum February 26, 2013, 9:41 am
- Re: Seat altea -No Start with no comms - james mccallum February 26, 2013, 9:44 am
- Re: Seat altea -No Start with no comms - Lee Hemmings February 27, 2013, 8:55 am
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - James McCallum February 27, 2013, 7:15 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - jm February 27, 2013, 7:29 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - John Ritchie February 27, 2013, 7:52 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - lee hemmings March 1, 2013, 4:21 pm
- Re: Seat Altea 1.6 BSE 2008 - Non start with no comms # - lee hemmings March 4, 2013, 11:10 am
- Fixed # - Lee Hemings March 11, 2013, 3:56 pm
« Back to index | View thread » |
on March 4, 2013, 11:10 am, in reply to "Seat Altea 1.6 BSE 2008 - Non start with no comms #"