Re: MGF 1.6 2001 mems3 engine coolant blower. Archived Message
Posted by Steve Norman on March 11, 2007, 10:32 pm, in reply to "Re: MGF 1.6 2001 mems3 engine coolant blower."
Hi All, Basically, I was asked to code the new ecu with T4. It was a MGF MEMS 3 1.6 2001MY. manual It will comms with all ecus, read fault codes, live data etc. When connecting to the engine old ecu it will display the part number, but the other details either say ? or spurious letters & numbers for the date coded etc. (I have had this before on disco2 ecu's & recoding sorted it out). Both ecu's were NNN000060, it has No ABS, or aircon. I tried coding the old ecu & it seems to get up to the point of recoding it & says comms failed to MEMS 3 ecu, & suggests checking comms to other ecu's, (all OK). it repeatedly does this, on both new, or old ecu's, (with the same data on the opening screen) I tried to match the immo into the new ecu & it displays the same no comms message. The NNN000060 is the suggested ecu suggested by T4 from the VIN decode, so assume is correct. Does anyone know if all comms is just via the K line, even for coding? The new ecu came in a sealed rover box, so assume was previously uncoded. I tried an earlier T4 diag disc just in case the latest (005) was too new.Regards Steve
|
Message Thread:
- MGF 1.6 2001 Mems3 - Radiator cooling fan fault, runs all the time # - Bryan Smith March 1, 2007, 8:45 pm
- Re: MGF 1.6 2001 mems3 engine coolant blower. - Nigel Bennett March 1, 2007, 10:33 pm
- Re: MGF 1.6 2001 mems3 engine coolant blower. - Chris Davies March 2, 2007, 12:21 am
- Re: MGF 1.6 2001 mems3 engine coolant blower. - Mike Walker March 2, 2007, 9:19 am
- Update/fix - Bryan Smith March 4, 2007, 3:26 pm
- Not fixed after all! - Bryan Smith March 9, 2007, 6:35 pm
- Re: MGF 1.6 2001 mems3 engine coolant blower. - Russell Davey March 10, 2007, 12:44 pm
|
|