Re: renault laguna II /2002 / F4P770 /1.8 throttle problem will not rev Archived Message
Posted by d jackson on November 18, 2007, 10:56 am, in reply to "Re: renault laguna II /2002 / F4P770 /1.8 throttle problem will not rev"
Thanks Alan, Andy and Michael Have not measured throttle pedal volts at ecu, as i have been waiting for some pin data to arrive from my Renault guy so i could check pedal and motor. He cant get pin data but did get me clip vers 77 10/07 (DVD) and diaologys so if anybody wants a copy send me an e mail. Michael I think i carried out the procedure correctly but not sure so here is what i did. in main screen entered Automatic search for Vin Vin was then automatically entered, entered order number as 0. Then i went to the chip symbol on the left that says reprogramming. after pressing this it gives me three options reprogram Injection,Air con or Autobox. i selected injection. Next page has three options Reprogramme,consult computer and consult tool. If i press consult computer i think it shows a list of the various updates that have been installed these date from 2001 to 6/2007. Not sure what consult tool is ? looks like a record of every reprog tool has done. If i then select the Reprogram option i am presented with a warning message that says "computer vin not available tool will use Vin entered in main menu" if i then press ok the page asks for a repair order and has already selected 0. Also there is another optional box that asks for "vehicle Technical specification optional" and message underneath saying "10 alphanumeric number is provided by Techline within scope of an emergency procedure" Ignoring this section because it does say optional i then pressed the Validate button a warning box appears stating connect battery charger to vehicle and clip tool to mains,then i press Validate again and a battery voltage check is carried out, i can then hear that the laptop is searching the installed reprog disc vers V41.0 11/05. after this i get a message "computer already programmed operation impossible. Did i do it wrong Many Thanks Dave p.s also when i carry out the canbus test the tool cannot find the Instrument pack so highlights it as red.
|
|