Year of Manufacture *: 2003
Engine Size and Code *: 1.6 z16xe
( Optional ) Scanner Used: Mach vci
Had this one in after someone else. The car will run for approx 30mins then cut out and will not start again in til 5/10mins.. Another garage have replace crank sensor. Coil pack, mass air flow, O2 sensor. I read codes and am getting ecu processor fault, ecu not programmed, immobilizer not programmed with ecu.
I done all basic tests like check earths and powers look at live data.i took the gamble of testing ecu with the ecu doctor but all tests were fine. I forgot to mention there is a slight misfire at idle as well.
I done an low amp test on injectors thinking one could be spiking ecu but all tested OK.
Any help would be appreciated and I'm new to using a picoscope so be patient with me. (in training)
Thank in advance
Thanks Shane
Message Thread
« Back to index | View thread »
Copyright © uk autotalk